combustion chamber的例句大全

It can provide a powerful tool for the engineering analysis ofgeometry optimization for the combustion chamber.

数值试验的结果表明,本文所建立的数值分析平台对燃烧室的设计优化提供了一个实用的工具.

A combustion chamber and its igniters, injectors, and other related apparatus in jet engine or turbine.

覆盖在往复式发电机引擎的汽缸内腔的封闭一端的可分离的盘状物体.

When the beetle needs protection, the chemicals flood the combustion chamber.

当甲虫需要保护, 化学药物充斥燃烧膛.

Usually a gas cooler is used between the combustion chamber and hydrator.

通常在燃烧室和水合器之间设置一个气体冷却器.

It is shown that the engine with spherical combustion chamber is beneficial to its output.

简要分析了改善发动机性能的措施.结果表明,采用球形燃烧室有益于提高输出功率.

Using a ball end mill to form part of the combustion chamber.

用球头铣刀的组成部分燃烧室.

You can accomplish this by forcing more air into the combustion chamber.

你可以通过把更多空气强制压入燃烧室来实现.

Improving combustion for reducing exhaust emissions is a top research project swirl chamber engines.

系统报道了通过改进燃烧室结构设计降低排放的实验方法和手段.

The lower one prevents the oil splashed onto the cylinder bore from entering the combustion chamber, and is called an oil ring.

底下的一道防止机油飞溅到缸筒从而窜入燃烧室的环叫做油环。

Based on the SALE frame, the early code of ALE, compiled has been suitable for the Solid Rocket Motor combustion chamber flow field analysis computational procedure, the solution gas phase flows.

借助于ALE方法的早期程序SALE的基本框架，编写了适用于固体火箭发动机燃烧室流场分析的计算程序，求解气相流动。

Each quantity is considered to be a function of the crank angle and radial position in the combustion chamber.

各计算量均作为曲轴转角和燃烧室径向位置的函数；

Heat is used to raise steam which either turns a turbine or forces a piston to move up and down in a cylinder. chamber, combustion, for turbojets or turbopropellers

由热产生的水蒸气或者使涡轮旋转或者使活塞在气缸中上下运动。燃烧室，用于涡轮喷气发动机或涡轮螺旋桊发机

The Application of Double Convex Combustion Chamber to 4-stroke Engine

双凸型燃烧室在四冲程发动机上的应用

It is concluded through analysis that the combustion chamber contraction cavity of the thick-top piston is mainly caused by the defect of the mould and the inefficiency of the water-cooling system.

经过分析得出结论：造成厚大项部活塞毛坯燃烧室缩孔问题的主要原因是由于模具本身的弊端和水冷系统效果不佳。

The reason resulting in contraction cavity in top of 195T piston combustion chamber in practice was analyzed, and the countermeasures of eliminating the contraction cavity were taken.

研究了在生产195T活塞毛坯时所遇到的燃烧室顶部缩孔问题，对其产生原因进行了分析，并提出了消除缩孔所采取的措施。

Adiabatic film cooling effectiveness downstream of primary jet in combustion chamber

燃烧室主燃孔下游气膜绝热温比研究

The calculation of the heat transfer within the ante-combustion chamber is considered separately.

对予燃室内部的传热计算单独做了考虑；

The geometry of the combustion chamber and the atomisation of the fuel play a decisive role here.

燃烧室的几何曲线和燃油的雾化扮演决定性的角色。

By analyzing the material and structure of the gas turbine combustion chamber with gas compressor cylinder proper, the key point of the assemble welding process has been worked out, and the special assembling tool set up has been designed as well.

通过对燃气轮机燃烧室兼压气机缸体的材料、结构进行分析研究，制订了装焊工艺要点，并设计了专用的装配工装。

Isoface Technology Application to Three-demension Numerical Simulation in the Chamber Flow of the Internal-combustion Engine

等值面技术在缸内流动三维数值模拟后处理中的应用研究